GT350 Mustang Front Lower Control Arms

The SPL Front Lower Control Arms (FLCA) provide roll center, camber, and track width adjustment for the Shelby GT350 and GT350R. Using a mixture of billet aluminum, stainless steel, chro-moly steel, and titanium results in strong, adjustable arms that are 2.0 lbs lighter than stock arms.The ability to run more negative camber greatly improves the peak lateral grip available, dropping several seconds off of lap times when tested on the Vorshlag Dark Horse. This is especially important with better tires and a must-have for anyone looking to prevent excessive outer shoulder wear (and heating) on their tires due to a lack of camber.The lower control arms come with a ride height sensor bracket to maintain factory ride height sensor location, regardless of length of the arm to keep the Ford chassis electronics happy. Benefits Adjustable Camber, Roll Center, and Track Width Easy, On-car Adjustability Improved Peak Grip and Tire Life with Ideal Camber Settings Lightweight, High-Strength Construction Stackable 304SS Roll Center Spacers in 1/8" and 1/4" Sizes US Made, PTFE Lined FK Rod Ends    Materials 6061-T6 Aluminum Black Anodized Arm and Clamps 4130 CrMo Electroless Nickel Plated Double Adjuster Ti6Al4V Titanium Socket Head Cap Screws 304 Stainless Steel Roll Center, Mounting, and Knuckle Spacers 5/8" 4340 CrMo Stud FK PTFE-lined Spherical Bearings (F1 spec, self-cleaning)   Suitable for all uses, from daily driver to race car.   Featured On Steve's 1300+WHP Serpent Stangs Racing GT500 Time Attack Car   Confirmed Applications 2015 - 2019 Shelby GT350 and GT350R FITMENT WARNING DOES NOT fit the Shelby GT500, 2020 GT350, or non-Shelby Mustangs. We have specific FLCAs for those fitments: 2015 - 2023 Ford Mustang (S550, inc. GT, EcoBoost, V6) Front Lower Control Arms Shelby GT500 / 2020 Shelby GT350R Front Lower Control Arms Install Instructions SPL FLCA GT350 Instructions IMPORTANT INSTALL INFO S550 KNUCKLE TAPER VARIATIONS Ford made numerous variations of the front knuckles across the S550 Mustang and Shelby line-up. These knuckles vary across nameplates (Mach 1, GT350, etc), years (2019 vs 2020 GT350), and even options (Handling Pack 2, etc). Each knuckle variant may have different conical tapered seats where the front control arms mount. It is VERY IMPORTANT to verify the supplied conical tapered spacer fits snuggly into the knuckle, has near zero lateral end play (as-in it will not rock within the bore), and seats fully into the knuckle when installed at the proper torque value. If you need clarification or feel you may have the wrong spacer for your Mustang, then please email us.