Siberian Bushing USAHigh-Quality OEM Standard Bushings
Bushings designed for sport and racing applications with a hardness of 80/90 Sha
Attention! Due to the structural diversity of the mounting of shock absorbers to the suspension and the body of the car, only the general principles of the bushings replacement are considered in this manual. Dismantling Unscrew the elements of the shock absorber mounting to the suspension and the body of the car. Remove the thrust […]
Dismantling Remove the worn out bushings from the frontal and rear lugs of the leaf spring and from the car’s frame brackets by any suitable way. Clean the bearings in leaf spring’s lugs and the bearings in the frame brackets from rust and dirt. Rate the degree of wear and damage of the fixing elements […]
Attention! Before starting works on dismantling and installing the pad, note the location of the pad’s cut on the steering rack. This is important for proper installation and operation of the pad. Dismantling Unscrew the elements of the steering rack pad’s mounting to the frame or the body of the car. Remove the pad from […]
Attention! Before starting works on dismantling and installing the pad, note the location of the pad’s cut on the steering rack. This is important for proper installation and operation of the pad. Dismantling Unscrew the elements of the steering rack pad’s mounting to the frame or the body of the car. Remove the pad from […]
Attention! Due to the structural diversity of the mounting of shock absorbers to the suspension and the body of the car, only the general principles of the bushings replacement are considered in this manual. Dismantling Unscrew the elements of the shock absorber mounting to the suspension and the body of the car. Remove the thrust […]
Purpose of use. Siberian Bushing spare parts are designed to replace the worn out rubber parts of the car chassis. Significant differences of Siberian Bushing spare parts. Design of some parts has been changed in comparison with the original ones. For example, original bushing has an outer metal shell, but that one of Siberian Bushing […]
Attention! Due to the structural diversity of the mounting of shock absorbers to the suspension and the body of the car, only the general principles of the bushings replacement are considered in this manual. Dismantling Unscrew the elements of the sway bar end bushings’ mounting to the suspension and the body of the car. Remove […]
Attention! Before starting a work of the removing and installation of the control arm bushing with stepped outer metal shell, take note of its placement. If the placement of the bushing is significant for the proper operation, mark the correct position of the bushing in the control arm. Determine the difference of the outer metal […]
Attention! Before starting a work of the removing and installing of the control arm bushings take note of the bushing’s placement. If the placement of the bushing is significant for the proper operation, mark the correct position for the bushing in control arm. If arm has a П-shaped profile, use the strut to avoid deformation […]
Attention! Before starting a work of the removing and installing of the bushings for the sway bar end links, take note of the shape and location of the thrust washers relatively to the bushings. Removal Unscrew the nuts of sway bar end links. Remove the thrust washers. Dismount the outer bushings. Remove the end links […]
